Bell Boots in a classic model, with cooling effect
Cool on Track™ Bell Boots enclose the hoof in its entirety and cool and moisten the hoof capsule and crown stripe, where the hoof's wall horns are formed.
The material absorbs large amounts of water and then cools by evaporation as long as it is moist. The exterior is made of a durable mesh material with large meshes. It allows air to circulate freely and stabilizes and maintains the shape of the boots. Closes with a wide and strong Velcro strap.
The product is soaked in water. Once excess water has been squeezed out, it is ready to use.
NOTE: Is the product dry when you take it out of the packaging? Wet the product before unfolding it! Manipulate the product only when the material is damp. Do not bend or break the material when it is dry and has hardened.
Observe:
-
Material hardens as it dries after first use
-
Do not bend or break the material when it is dry. Shape the product for storage when the material is still damp.
-
Always wet the product after it has dried, so that it is soft and ready to use again.
-
Store in a dry place.
Cool on Track™ is a technical, cooling material that lowers the temperature by about 6 °C with the help of the evaporation of the water. The product is soaked, and when excess water is squeezed out, it is ready to use. No chemicals are used for the cooling effect. The material retains its cooling ability as long as it is wet. Read more about Cool on Track™.
- Lowers the temperature by about 6 °C.
- Cooling using water evaporation
- Does not contain chemicals
- No freezer required
Hand wash only, 30°C, Use sparingly with mild liquid detergent. Do not bleach or fabric softener. Do not dry clean. Do not iron. Do not tumble dry.
Rinse thoroughly and squeeze out excess water.
Storage after use:
Wash the product after use and leave to dry flat.
Store the product flat and do not fold it in a dried state. If the product is folded or broken in a dry state, cracks may occur. Be careful and let the duvet absorb plenty of water before using it after storage.
Should cracks occur, the product can still be used. However, the cracks have a tendency to absorb less water. Ample absorbency is important as the material cools when evaporating.
Cooling material: 95% PVA, 5% Cotton
Mesh: 100% Polyester
We are based in New Zealand and all products are shipped from Palmerston North